WALDEMAR DESIGN AND MACHINE L.L.C.
MADE IN THE USA
YOUTUBE
Find us at https://www.youtube.com/@wdmrolls
403-Series
3/8" x 12' Double Initial Pinch Plate Roll. It has a Cone Attachment and a Starting Groove Option. Top Roll is 12" in diameter x 12' long.
4 Roll Plate Roll with the base capacity to roll 0.09" MS to a 16" diameter in a single pass
Added to a 403-6-5 to square narrow strips
3/8" x 12' Double Initial Pinch Plate Roll. It has a Cone Attachment and a Starting Groove Option. Top Roll is 12" in diameter x 12' long.
310-Series
Initial Pinch Plate Roll with a top roll diameter of 2.6" x 4' long. This machine has a base capacity of 20ga MS x 4' long to a 10.4" diameter. It is pictured with an optional foot switch.
Initial Pinch Plate Roll with a 5" diameter x 5' long plate roll. Base capacity is 10ga x 5' to a 20" diameter.
The one on the right has extended shafts and dies with guide roll and anti-twist attachments.
Initial Pinch Plate Roll with a top roll diameter of 2.6" x 4' long. This machine has a base capacity of 20ga MS x 4' long to a 10.4" diameter. It is pictured with an optional foot switch.
101-Series
Pyramid Style 3 Roll Plate Roll with 3.5" Top Roll x 5ft Working Length. Base Capacity 0.08" MS to a 14in diameter in a single pass.
Drive Housing.
Pinch Pyramid Plate Roll in a vertical orientation with an 8" diameter top roll and a 6' working length.
Pyramid Style 3 Roll Plate Roll with 3.5" Top Roll x 5ft Working Length. Base Capacity 0.08" MS to a 14in diameter in a single pass.
K-Series
WDM K Series Hydraulic Initial Pinch Plate Roll with a 7in diameter top roll x 4ft long working length
WDM K Series Hydraulic Initial Pinch Plate Roll from the front side.
WDM K Series Hydraulic Initial Pinch Plate Roll view of the motor and top of valve bank
WDM K Series Hydraulic Initial Pinch Plate Roll with a 7in diameter top roll x 4ft long working length
PR-Series
PR200 with 2"x2"x3/8" angle in the dies.
Angle Roll set-up in the horizontal position.
View of the machine from the front
PR200 with 2"x2"x3/8" angle in the dies.
Specialty Machines
Initial Pinch Roll modified to have a pinch roll with an orbital travel to expand the throat opening between the top and pinch roll.
Over 4.5" opening between the rolls.
Close-up of the rollers.
Initial Pinch Roll modified to have a pinch roll with an orbital travel to expand the throat opening between the top and pinch roll.